Alarmquip Security Systems – Lift Phone Monitoring Data Entry

Welcome to the lift phone monitoring data entry checklist.

Premises Name*

Alarmquip Ticket Number

If you are employed or contracted by Alarmquip and have an Alarmquip ticket number, enter it here. Usually 4 or 5 digits. If not, please leave this blank.

Lift Location (Friendly Name)*

E.g. Building D

Lift Number*

Enter the lift number as shown on the placard within the lift car

Telstra Caller ID*

Optus Caller ID*

Number the lift has been programmed to call*

Is this number programmed into the gateway (Hotline) or the lift phone?*

Gateway as a hotline number
The lift phone

Device Signal Strength*

Enter the device signal strength. E.g. -50dBm

Gateway device location*

Has the gateway device battery been dated?*

Sure has!
The device doesn't have a battery

Gateway remote programming PIN/code*

Was the lift phone tested?*

Yes, the call connected successfully
No, Alarmquip permitted me to leave without it being working

Does the lift phone have a pre-recording identifying the premises name, lift location and address?*

Yes
Originally no, but its now setup

Who supplied/manages the SIM cards?*

Alarmquip managed
Client supplied
Lift contractor

Gateway Photo*

Drop files here or

Max. file size: 128 MB.

Upload a photo showing the gateway location. Try to stand a few meters back to show reference of where it is in the room.

Lift Phone Photo*

Drop files here or

Max. file size: 128 MB.

Stand on the opposite side of the lift to the lift phone and take a photo of the phone, lift buttons and compliance placard.

Additional Info

Any additional info you'd like to note?

I have tested the lift phone and I can confirm communication was made to the destination*

Yes
No, Alarmquip permitted me to leave without it working

Company Name*

Enter your company name above.

Technician Name*

Enter your full name above.

Technician Mobile*